IBM C9020-668 Exam Actual Questions

The questions for C9020-668 were last updated on Nov. 27, 2024.
  • Viewing page 1 out of 15 pages.
  • Viewing questions 1-4 out of 60 questions

Topic 1 - Single Topic

Question #1 Topic 1

An IBM mainframe client has IBM DS8886 CKD storage installed. The customer has decided to use another new IBM DS8886 and use IBM Metro Mirror to provide a synchronous redundant copy of the data.
Which additional IBM software enables non-disruptive failover in the event of a storage hardware failure?

  • A. IBM Remote Pair FlashCopy
  • B. IBM Global Mirror
  • C. IBM High performance FICON
  • D. IBM HyperSwap
Reveal Solution Hide Solution   Discussion  

Correct Answer: D 🗳️
You can create an IBM HyperSwap topology system configuration where each I/O group in the system is physically on a different site. When used with active- active relationships to create HyperSwap volumes, these configurations can be used to maintain access to data on the system when power failures or site-wide outages occur.
References:
https://www.ibm.com/support/knowledgecenter/en/STVLF4_7.7.1/spectrum.virtualize.771.doc/svc_hyperswap_configuration.html

Question #2 Topic 1

How are key management services provided for the IBM DS8886 storage system?

  • A. SKLM
  • B. Blockchain
  • C. Full disk encryption
  • D. Non-repudiation system
Reveal Solution Hide Solution   Discussion  

Correct Answer: A 🗳️
Full Disk Encryption (FDE) drive sets are used with key management services that are provided by IBM Security Key Lifecycle Manager (SKLM) software or
Gemalto SafeNet KeySecure to allow encryption for data-at-rest on a DS8880.
References: IBM DS8880 Data-at-rest Encryption, December 2016, page ix

Question #3 Topic 1

Which offering provides scale-out parallel processing and dynamically accelerates performance of analytics clusters when integrated with the IBM FlashSystem?

  • A. IBM XIV
  • B. IBM Spectrum Scale
  • C. Real-time Compression
  • D. IBM Spectrum Copy Data Management
Reveal Solution Hide Solution   Discussion  

Correct Answer: B 🗳️
Although Spectrum Scale and FlashSystem are both available by themselves, and theres no requirement to combine them, doing so can result in the IT equivalent of "1+1=3." Each solution complements the other in supporting the needs of two of today’s most common, fastgrowing "application ecosystems"— private clouds and [big] data analytics. Both of those application ecosystems must deliver extreme capacity and extreme performance simultaneously and economically. If only one or two of the scale/speed/economy attributes is needed, then each of the IBM products can stand alone very well. But where all three are prerequisites, the joint IBM solution shines.
References:
http://docs.media.bitpipe.com/io_13x/io_131467/item_1372378/Enabling%20Private%20Clouds%20and%20Analytics.PDF

Question #4 Topic 1

A customer has an older IBM storage subsystem and wants to know where to find the Service Discontinued data for the product.
What should the technical specialist tell the customer?

  • A. Check IBM Digital Techline Center.
  • B. Check IBM SSIC webpage.
  • C. Check the IBM sales manual.
  • D. Check the IBM Knowledge Center.
Reveal Solution Hide Solution   Discussion  

Correct Answer: D 🗳️
When service is discontinued, corrections to known problems remain available, but the development team is redirected to other work, and no new, tested corrections will be generated for general use. Known problems may be reviewed and ordered via electronic vehicles such as the internet (e.g., http:// www.ibm.com/support) however support provided by the IBM Client Support representatives, will be discontinued.
References:
https://www-304.ibm.com/support/customercare/sas/f/handbook/offerings.html

Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...