To enable remote devices to send log messages to Dimension through the gateway Firebox, what must you verify is included in your gateway Firebox configuration? (Select one.)
A.
You can only send log messages to Dimension from a computer that is on the network behind your gateway Firebox.
B.
You must change the connection settings in Dimension, not on the gateway Firebox.
C.
You must add a policy to the remote device configuration file to allow traffic to a Dimension.
D.
You must make sure that either the WG-Logging packet filter policy, or another policy that allows external connections to Dimension over port 4115, is included
D is correct.
"For external Fireboxes to send log messages to a Dimension instance behind a Firebox, the Firebox must have a policy to allow inbound TCP port 4115 connections, with a static NAT action to forward those connections to Dimension."
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Fireware/dimension/deploy_behind-device_d.html
For external Fireboxes to send log messages to a Dimension instance behind a Firebox, the Firebox must have a policy to allow inbound TCP port 4115 connections, with a static NAT action to forward those connections to Dimension.
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
memorx
2 years, 3 months agozoodata
2 years, 5 months agopoyzerj
2 years, 6 months agomoweME
3 years, 1 month agodefrag1971
3 years, 3 months agogarga
3 years, 10 months agoSatornjkk
3 years, 10 months agoKiwiTech
4 years agoItachI_Sama
4 years, 1 month agoElvisBac
4 years, 1 month agoThresmonkey
4 years, 6 months ago