ExamTopics Logo
Mail Us[email protected]
Menu
Vmware Discussions
exam questions

Exam 2V0-21.23 All Questions

View all questions & answers for the 2V0-21.23 exam
Go to Exam

Exam 2V0-21.23 topic 1 question 96 discussion

Actual exam question from VMware's 2V0-21.23
Question #: 96
Topic #: 1
[All 2V0-21.23 Questions]

An administrator remotely deploys VMware ESXi using an out of band management connection and now needs to complete the configuration of the management network so that the host is ac-cessible through the vSphere Host Client.

The following information has been provided to complete the configuration:

• Host FQDN: esxi01.corp.local
• Management VLAN ID: 10
• DHCP: No
• Management IP Address: 172.16.10.101/24
• Management IP Gateway: 172.16.10.1
• Corporate DNS Servers: 172.16.10.5, 172.16.10.6
• DNS Domain: corp.local

In addition, all host configurations must also meet the following requirements:

• The management network must use only IPv4 network protocols.
• The management network must be fault tolerant.

Which four high level tasks should the administrator complete in the Direct Console User Inter-face (DCUI) in order to meet the requirements and successfully log into the vSphere Host Cli-ent? (Choose four.)

  • A. Set the value of the VMware ESXi Management Network VLAN ID to 10.
  • B. Configure at least two network adapters for the VMware ESXi Management Network.
  • C. Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 ad-dress.
  • D. Create a DNS A Record for the VMware ESXi host on the corporate DNS servers.
  • E. Disable IPv6 for the VMware ESXi Management Network.
  • F. Restore the original Management vSphere Standard Switch.
  • G. Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for names resolution.
Show Suggested Answer Hide Answer
Suggested Answer: ABCE 🗳️
by ross78 at July 10, 2023, 2:02 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
ross78
Highly Voted 1 year, 9 months ago
ABCE - dns is not mandatory
upvoted 10 times
...
rajVCIX
Highly Voted 1 year, 8 months ago
ABCG can be done in the DCUI of the ESXi host. Remember the question states "Which four high level task should the administrator complete in the DIRECT CONSOLE SURE INTERFACE in order to meet the requirements. Answers D and F cannot be done in the DCUI of the ESXi host. Answer E - IPv6 is not needed to meet the requirements and it stated it must use IPv4 protocol
upvoted 5 times
...
Phat
Most Recent 4 days ago
Selected Answer: ABCG
ABCG - when we set ipv4, no need disable ipv6
upvoted 1 times
...
PCG1
5 months, 1 week ago
Selected Answer: ABCE
A is explicitly required: 'Management VLAN ID: 10' B is explicitly required: 'The management network must be fault tolerant.' C is implicitly required as a static IP address has been provided D is done on the DNS servers, not the DCUI E is explicitly required as only IPv4 has been allowed F there's nothing to restore G It's not the 'management network DNS config', it's the host's global DNS config used by all services, including iSCSI and whatnot.
upvoted 1 times
anonymous1966
4 months ago
Sorry, but I cannot see how to configure 2 network adapters using DCUI. I would include G instead of B. Because there is DNS in DCUI config. What do you think?
upvoted 1 times
...
...
magetrip
9 months, 4 weeks ago
Selected Answer: ABCG
D. Create a DNS A Record for the VMware ESXi host on the corporate DNS servers. This is necessary but not performed through the DCUI; it's done on the DNS server. E. Disable IPv6 for the VMware ESXi Management Network. While this meets the IPv4-only requirement, it isn't explicitly necessary since the focus is on IPv4 configuration. F. Restore the original Management vSphere Standard Switch. This is not relevant to the configuration tasks outlined.
upvoted 2 times
...
Pipiq_namornek
11 months, 2 weeks ago
So E or G is correct for sure? Even the voting, I am G now...
upvoted 1 times
walker0418
5 months, 3 weeks ago
You don't need to disable IPV6 to successfully log into a host. That is not a req. DNS on the other hand, is a requirement. G.
upvoted 2 times
...
...
Vachs
11 months, 3 weeks ago
You don't need to resolve your ESXi host name.
upvoted 1 times
...
AtifOnWire
1 year, 6 months ago
Selected Answer: ABCG
No need to disable IPv6
upvoted 4 times
...
guestionme
1 year, 7 months ago
I'm choosing ABC with *G* and not E because answer C states "Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address." We don't need to specifically disable IPv6 in this case because it already has an IPv4 address assigned (Answer E).
upvoted 3 times
Bert_77
1 year, 7 months ago
IPv4 is a requirement (MUST be used), so IPv6 must be disabled.
upvoted 3 times
RJB71
8 months ago
It doesn't have to be disabled to meet the min requirements " order to meet the requirements and successfully log into the vSphere Host Client? (Choose four.)"
upvoted 1 times
...
...
...
kijken
1 year, 7 months ago
Selected Answer: ABCE
I would say abce, work that needs to be done in local interface. Not external dns or something
upvoted 2 times
...
Spock2023
1 year, 7 months ago
Selected Answer: ABCE
• vlan 10 (A) • The management network must be fault tolerant. ( Two uplinks required) B • DHCP: No (Use Static IP) C • The management network must use only IPv4 network protocols.(disable IPV6) E
upvoted 3 times
RJB71
8 months ago
Disabling ipv6 is not a requirement to meet the min requirements as asked for in the question " order to meet the requirements and successfully log into the vSphere Host Cli-ent? (Choose four.)"
upvoted 2 times
...
...
rajVCIX
1 year, 8 months ago
ABCG is correct and can be done in the DCUI of the ESXi host. Remember the question states "Which four high level task should the administrator complete in the DIRECT CONSOLE USER INTERFACE in order to meet the requirements. Answers D and F cannot be done in the DCUI of the ESXi host. Answer E - IPv6 is not needed to meet the requirements and it stated it must use IPv4 protocol
upvoted 3 times
Bert_77
1 year, 7 months ago
IPv4 is a requirement (MUST be used), so IPv6 should be disabled. DNS is not in the requirements and is not needed to login to vSphere Host Client --> Correct answer is ABCE
upvoted 1 times
PePe198706
1 year, 6 months ago
it is not necessary to disable IPv6 to use only IPv4. It is a basic.
upvoted 2 times
...
...
...
Pledian
1 year, 8 months ago
The correct answers are A, C, E, and G. Here are the steps to configure the management network on the ESXi host: Set the value of the VMware ESXi Management Network VLAN ID to 10. Configure at least two network adapters for the VMware ESXi Management Network. Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address. Disable IPv6 for the VMware ESXi Management Network. Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for names resolution. The other options are incorrect:
upvoted 2 times
...
Ilmace86
1 year, 9 months ago
Selected Answer: ABCE
I'll go for E and not D because "The management network must use only IPv4 network protocols." and without DNS you can still access the host using the IP
upvoted 3 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago