Exam NS0-194 topic 1 question 49 discussion

Actual exam question from Netapp's NS0-194

Question #: 49
Topic #: 1

A customer ordered a FAS2720 cluster with 8 TB SATA drives. The customer wants to use the Advanced Drive Partitioning (ADP) feature to avoid consuming the high capacity drives for the root aggregate. Before you use the cluster setup, you issue the aggr status command and notice that ADP is not being used.
In this scenario, what would you use to implement ADP?

A. loader prompt
B. special boot menu
C. nodeshell
D. SP prompt

Show Suggested Answer

Suggested Answer: B 🗳️

by RjayC at June 3, 2022, 11:55 p.m.

Comments

Submit Cancel

RjayC

Highly Voted 2 years ago

Selected Answer: B

Reboot the node to access the boot menu by using the system node reboot command at the system prompt. The node begins the reboot process. During the reboot process, press Ctrl-C to display the boot menu when prompted to do so. The node displays the following options for the boot menu: (1) Normal Boot. (2) Boot without /etc/rc. (3) Change password. (4) Clean configuration and initialize all disks. (5) Maintenance mode boot. (6) Update flash from backup config. (7) Install new software first. (8) Reboot node. (9) Configure Advanced Drive Partitioning Selection (1-9) 9 https://docs.netapp.com/us-en/ontap/system-admin/manage-node-boot-menu-task.html?q=Advanced%20Drive%20Partitioning

upvoted 5 times

...

Sboas

Most Recent 1 month, 2 weeks ago

Answer is A, You need to first setenv root-uses-shared-disks? true then savenv then go through the steps RjayC listed

upvoted 1 times

...

Exam NS0-194 All Questions

View all questions & answers for the NS0-194 exam

Exam NS0-194 topic 1 question 49 discussion

Comments

RjayC

Sboas

SY0-701