exam questions

Exam 70-413 All Questions

View all questions & answers for the 70-413 exam

Exam 70-413 topic 1 question 65 discussion

Actual exam question from Microsoft's 70-413
Question #: 65
Topic #: 1
[All 70-413 Questions]

Your network contains an Active Directory forest that has two domains named contoso.com and europe.contoso.com. The forest contains five servers. The servers are configured as shown in the following table.

You plan to manage the DHCP settings and the DNS settings centrally by using IP Address Management (IPAM).
You need to ensure that you can use IPAM to manage the DHCP and DNS settings in both domains. The solution must use the minimum amount of administrative effort.
What should you do?

  • A. Upgrade DCE1 and DCE2 to Windows Server 2012, and then install the IP Address Management (IPAM) Server feature. Run the Set-IpamConfiguration cmdlet for each domain.
  • B. Upgrade DCE1 and DCE2 to Windows Server 2012, and then install the IP Address Management (IPAM) Server feature. Run the Invoke-IpamGpoProvisioning cmdlet for each domain.
  • C. Upgrade DC1 and DC2 to Windows Server 2012, and then install the IP Address Management (IPAM) Server feature. Run the Invoke-IpamGpoProvisioning cmdlet for each domain.
  • D. Upgrade DC1 and DC2 to Windows Server 2012, and then install the IP Address Management (IPAM) Server feature. Run the Set-IpamConfiguration cmdlet for each domain.
Show Suggested Answer Hide Answer
Suggested Answer: B 🗳️
You can use IPAM to manage DHCP servers running on Windows Server 2008 R2 and above. Here DCE1 and DCE2 are running Windows 2003, so they need to be upgraded to Windows Server 2008 R2 or above.
Invoke-IpamGpoProvisioning Creates and links group policies in the specified domain for provisioning required access settings on the servers managed by the computer running the IP Address Management (IPAM) server.
Incorrect:
DC1 and DC2 do not need to be upgraded as IPAM can manage DHCP servers running on Windows Server 2008 R2 and above.
Set-IpamConfiguration Sets the configuration for the computer running the IP Address Management (IPAM) server, including the TCP port number over which the computer running the IPAM Remote
Server Administration Tools (RSAT) client connects with the computer running the IPAM server.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
SummerSlumber
4 years, 6 months ago
DCE1 & 2 is Windows 2003
upvoted 1 times
...
SummerSlumber
4 years, 6 months ago
* You can use IPAM to manage DHCP servers running on Windows Server 2008 R2 and above. Here DCE1 and DCE2 are running Windows 2003, so they need to be upgraded to Windows Server 2008 R2 or above. * Invoke-IpamGpoProvisioning Creates and links group policies in the specified domain for provisioning required access settings on the servers managed by the computer running the IP Address Management (IPAM) server. Incorrect:Not C: DC1 and DC2 do not need to be upgraded as IPAM can manage DHCP servers running on Windows Server 2008 R2 and above. Not A, Not D: Set-IpamConfiguration Sets the configuration for the computer running the IP Address Management (IPAM) server, including the TCP port number over which the computer running the IPAM Remote Server Administration Tools (RSAT) client connects with the computer running the IPAM server. IPAM managed DHCP server requirements http://windowsitpro.com/windows-server-2003-end-support/ipam-managed-dhcp-server-requirements Upgrade the Windows 2003 Servers.
upvoted 1 times
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago