Exam HPE6-A73 topic 1 question 49 discussion

ACSP Student Guide, p.138 Common Troubeshooting Tips: * Make sure your desktop time and the switch's time is synched from the same NTP server. So I think the correct answer is B.

I looked in the NAE Guide and it verifies B as well. https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6724/index.html#GUID-2048A4D8-5458-4C00-ACA7-8C392182215E.html

Answer A

B is the correct option.

You cannot configure NTP in a Web Browser. It must be B. The webbrowser is running on the Desktop and the Desktop is configured via NTP

It says this is in troubleshooting - make sure the desktop time and the switch time are synched from the same NTP Server

Page 147 Study Guide Things you can do to fix this issue: ·Try clearing or resetting the web client browser cache. ·Ensure that the web client from which you are viewing the Web UI is set to a time zone based on UTC. For example, if your workstation is set to Eastern Standard Time (EST), and you want to use Pacific Standard Time (PST), change the time by setting the time zone instead of by manually resetting the time. ·Ensure that the switch is set to use NTP or to a time zone based on UTC time. NTP synchronizes the time of day among a set of distributed time servers and clients to correlate events when receiving system logs and other time- specific events from multiple network devices. All NTP communications use Coordinated Universal Time (UTC). To show the NTP status, use the show ntp status command. After you configure the switch, clear the NAE data by entering the clear nae- data command from the manager context. [Aruba Networks] Web Client Browser --> TimeZone Swicth--> NTP

Should be A Action Try clearing or resetting the web client browser cache. Ensure that the web client from which you are viewing the Web UI is set to a time zone based on UTC. For example, if your workstation is set to Eastern Standard Time (EST), and you want to use Pacific Standard Time (PST), change the time by setting the time zone instead of by manually resetting the time. Ensure that the switch is set to use NTP or to a time zone based on UTC time.

https://www.arubanetworks.com/techdocs/AOS-CX/10.10/HTML/nae/Content/Chp_TS/err-swi-tim-bro-tim-not-syn.htm It says set the same time-zone, not the same ntp server. Answer: A

B: Timezone Configuration: Check the timezone configuration of the Aruba NAE system. The displayed time in the graphs may be based on the configured timezone. Ensure that the timezone settings are accurate and aligned with the desired time representation.

Ensure the engineer's web browser is configured for the same timezone as the AOS-CX switch - Time Zone is the key here. PC running the UI and switch must be in the same time zone.

the correct answer is B.

B is correct

Correct answer is B

B is the answer

Somewhere in the Student Guide you can read the Browser and the switch shuold be in the same timezone.

It can also be B