Exam HPE6-A72 topic 1 question 28 discussion

B is valid

B is the right

B is correct.

B is definetly correct.

B is correct, switch# show vlan port 1/1/3 ------------------------------------------------------------------------------- VLAN Name Mode Mapping ------------------------------------------------------------------------------- 1 DEFAULT_VLAN_1 native-untagged port 2 UserVLAN1 trunk port 3 UserVLAN2 trunk port 5 UserVLAN3 trunk port 10 TestNetwork trunk port

B: switch# show vlan port 1/1/1 VLAN Config on Port(s) 1/1/1 --------------------------- VLAN ID VLAN Name Status Tagging ------- --------- ------ ------- 1 default Enabled Tagged 10 vlan10 Enabled Tagged 20 vlan20 Enabled Untagged

B is correct - C is an invalid command switch# show vlan port 1/1/3 ------------------------------------------------------------------------------- VLAN Name Mode Mapping ------------------------------------------------------------------------------- 1 DEFAULT_VLAN_1 native-untagged port 2 UserVLAN1 trunk port 3 UserVLAN2 trunk port 5 UserVLAN3 trunk port 10 TestNetwork trunk port 11 VLAN11 trunk port 12 VLAN12 trunk port 13 VLAN13 trunk port 14 VLAN14 trunk port 20 ManagementVLAN trunk port 30 VLAN30 trunk port 40 VLAN40 trunk port

Confirm B is the correct one

only B syntax is valid as per tested on the switch, but why the answer in dump is C? most of the dump will provide C as the answer, is it follow the answer database in exam facilities center such as Pearson Vue etc?

Definitely B

show vlan port 1/1/10 is the right one. Option B

B is the right

B is correct

B is correct

Confirming that 'B' is the correct answer.

B IS THE CORRECT