Exam DES-1D12 topic 1 question 52 discussion

subnet mask is right, but subnet is wrong; Providing the DNS details is one of the steps when creating the NAS server

B, because the question is not mentioning "For Directory Services", DNS configuration is required. to create a NAS Server a DNS is not needed, only when you implement it in a AD Enviroment.

Dell EMC PowerStore Configuring SMB Shares Planning considerations Review the following information before configuring NAS servers and file systems: File storage support is only available with PowerStore T model appliances. File storage is not supported with PowerStore X model appliances. NAS server networks Configure the following before configuring NAS servers with SMB protocol: 1. Configure one or more DNS servers. 2. If you are joining the NAS server to the Active Directory (AD), configure at least one NTP server on the storage system to synchronize the date and time. It is recommended that you set up a minimum of two NTP servers per domain to avoid a single point of failure. NOTE: During AD creation, NTP is configured. 3. Create a domain account in Active Directory.

C) DNS details is not a correct answer. same question is in the DES-1D12 Practice Test. B) Subnet (in test VLAN ID) is correct

C is correct Enable DNS The NAS server DNS can be enabled on the next page. For Directory Services, DNS configuration is required. Add at least one DNS server for the domain.

The FQDN is created from the NAS server and domain name combined, Subnet is the network i.e. 192.168.1.X WWPN is World Wide Port Number, so that only really leaves DNS - C DNS is also an option when configuring a NAS server via the Wizard in the manager GUI

I think the true answer is DNS details Name Description IP Address Subnet Mask/Prefix Length Gateway VLAN ID

B: Subnet

Enter the network configuration that will be assigned to the NAS server interface:  IP address  Subnet Mask  Gateway  VLAN ID seems more like subnet mask to me, where did you get this please?

C is correct