Exam PT0-001 topic 1 question 43 discussion

dddddddddd

looks good to me

Wrong wrong wrong. this is Egress sensor triggering. Egress sensors are the sensors on the inside that detect a person leaving the building and unlock the doors for them. An under the door tool would trigger that sensor and cause the doors to unlock. Lock bypass is actually for deadbolt locks. its generally done by shimming. Refer to pentest+ all in one study guide by ray nutting for more detail.

These "lock picking" questions, in the era of secure doors and RFID badges, really show how outdated this exam is sometimes.

The correct answer is D 'Lock bypass' according to the CompTIA Pentest+ Practice Test, Sybex. Note: Lock bypass is simply that. Bypassing locks without picking them. In this scenario, the tester is attempting a physical security assessment with the use an under-the-door tool, which goes underneath a door and pulls open a door handle from the inside.

D. Gaps underneath or between a set of doors may allow a tester to push a coat hanger through and wave it at the motion sensor, for example. Glass doors may facilitate the use of a laser pointer to trigger the motion detection. Under-the-door tools are specialized tools that allow someone to slide a device under a door and pull a lever-style handle on the inside of the door from the outside, therefore bypassing the need for a key to a lock (as an inside handle pull automatically unlocks the door).

Concur with D