exam questions

Exam 300-425 All Questions

View all questions & answers for the 300-425 exam

Exam 300-425 topic 1 question 63 discussion

Actual exam question from Cisco's 300-425
Question #: 63
Topic #: 1
[All 300-425 Questions]

An AP is receiving 802.11 packets on its 802.11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to Medium for 802.11a. Which action does the AP take with the packets?

  • A. All frames are classified as non-Wi-Fi frames and are not decoded by the 5 GHz radio.
  • B. Frames are decoded by the 2.4 GHz radio.
  • C. All frames are classified as non-Wi-Fi frames and are not decoded by the 2.4 GHz radio.
  • D. Frames are decoded by the 5 GHz radio.
Show Suggested Answer Hide Answer
Suggested Answer: D 🗳️

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
walacky
Highly Voted 10 months, 3 weeks ago
My opinion is D: .11a radio means we are at 5Ghz. RxSOP Medium setting means signal lower than -78dBm is ignored. So -77dBm is normally decoded by 5G radio https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/b_cg81_chapter_010001111.pdf
upvoted 11 times
...
FabriG
Highly Voted 7 months, 1 week ago
Selected Answer: D
According to Cisco, it is D.
upvoted 5 times
...
Farhad123
Most Recent 6 days ago
Selected Answer: D
D is correct , 802.11a means 5Ghz, also when we change the RxSOP to Medium that will be 78 then 77 will be decoded
upvoted 1 times
...
NHN88
7 months, 2 weeks ago
Selected Answer: D
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/hdx_final/b_hdx_dg_final/high_density_experience_features_added_in_release_8_0.html
upvoted 1 times
...
Alonzo_Harris
8 months, 1 week ago
Selected Answer: D
The answer is D Medium Threshold Rx-SOP: 2.4Ghz is -82dBm and 5Ghz is -78dBm All frames received with weaker RSSI than configured RS-SOP will be classified as non-WiFi frames and will not get decoded by the radio, only packets with acceptable RSSI values are decoded. Packets that are not decoded are treated as non-WiFi interference and detected at the AP as noise. So since -77dBm is not at the threshold of -78dBm the RSSI of -77dBm will be decoded by 802.11a (5Ghz)
upvoted 2 times
...
learningccnp
8 months, 3 weeks ago
Selected Answer: D
because 802.11a signal is 5Ghz , and whatever RxSOP, it only decode the 5Ghz signal, and not 2.4Ghz.
upvoted 2 times
...
Antasik
10 months, 1 week ago
Selected Answer: D
As walacky wrote D
upvoted 1 times
...
wili0001
10 months, 3 weeks ago
Selected Answer: A
RxSOP is enable so there is a threshold where AP ingnores the packet. I think the answer is A. Chapter 6. pag.133
upvoted 1 times
...
wili0001
10 months, 3 weeks ago
RxSOP is enable so there is a threshold where AP ingnores the packet. I think the answer is A. Chapter 6. pag.133
upvoted 1 times
...
Bapu20
11 months ago
Selected Answer: B
I honestly believe that the 2.4GHz will decode this because the High threshold for 2.4GHz is -79 dBm so -77 is better ,why would it drop a better packet received at a better threshold?
upvoted 1 times
Bapu20
11 months ago
Afterthought:The threshold for middle is -82DBm rather!typo!!
upvoted 1 times
madhir
10 months, 3 weeks ago
They are asking about the 802.11a (5Ghz radio) not the 2.4... As per walacky's comment above, -78dBm or lower is ignored so the answer in this case is D.
upvoted 2 times
...
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
Loading ...
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago