A.
R2 is directly connected to the receiver for this group and is the winner of an assert mechanism.
B.
R2 is directly connected to the receiver for this group, and it forwards the traffic onto Ethernet3/0, but it is forwarding duplicate traffic onto Ethernet3/0.
C.
R2 has the A flag (Accept flag) set on Ethernet 3/0. This is fine, since the group is in BIDIR-PIM mode.
D.
R2 is directly connected to the receiver for this group and is the loser of an assert mechanism.
E.
The A flag is set until the SPT threshold is reached for this multicast group.
Suggested Answer:A🗳️
show ip mroute Field Descriptions
Field -
Description -
RPF neighbor or RPF nbr - "Pass Any Exam. Any Time." - www.actualtests.com 228 IP address of the upstream router to the source. Tunneling indicates that this router is sending data to the RP encapsulated in register packets. The hexadecimal number in parentheses indicates to which RP it is registering. Each bit indicates a different RP if multiple RPs per group are used. If an asterisk (*) appears after the IP address in this field, the RPF neighbor has been learned through an assert. Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_2/ipmulti/command/reference/fiprmc_r/1rfmult3.html
This section is not available anymore. Please use the main Exam Page.400-101 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
AliMo123
3 years, 4 months ago