Exam 350-401 topic 1 question 246 discussion

Every Awesome Cisco Engineer Will Need Icecream Daily

A. Error is correct. The Number in %LINK-3-UPDOWN indicates this is logging level 3: Number of the desired severity level at which messages should be logged. Messages at or numerically lower than the specified level are logged. Severity levels are as follows: 0 —emergency: System unusable 1 —alert: Immediate action needed 2 —critical: Critical condition—default level 3 —error: Error condition 4 —warning: Warning condition 5 —notification: Normal but significant condition 6 —informational: Informational message only 7 —debugging: Appears during debugging only https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/nxos/commands/sm/logging-level.html

Every Awesome Cisco Engineer Will Need Ice cream Daily.

A is correct

Eat A Cat Every Wednesday Night In Delight

A is the correct answer. The acronym I use is Edwards, Always, Cries, Even, When, Nobody, Is, Dead

cisco_R2(config)#logging buffered ? <0-7> Logging severity level <4096-2147483647> Logging buffer size alerts Immediate action needed (severity=1) critical Critical conditions (severity=2) debugging Debugging messages (severity=7) discriminator Establish MD-Buffer association emergencies System is unusable (severity=0) errors Error conditions (severity=3) <<<<<<<<<<<<<<<<<<<<<<<< filtered Enable filtered logging informational Informational messages (severity=6) notifications Normal but significant conditions (severity=5) warnings Warning conditions (severity=4) xml Enable logging in XML to XML logging buffer <cr> cisco_R2(config)#logging buffered

Provided answer is correct

Answer is A (Interfaces up/down status is an error) From https://community.cisco.com/t5/networking-documents/how-to-configure-logging-in-cisco-ios/ta-p/3132434 Router messages 0 Emergencies System shutting down due to missing fan tray 1 Alerts Temperature limit exceeded 2 Critical Memory allocation failures 3 Errors Interface Up/Down messages 4 Warnings Configuration file written to server, via SNMP request 5 Notifications Line protocol Up/Down 6 Information Access-list violation logging 7 Debugging Debug messages

Logging severity messages: seq no:timestamp: %facility-severity-MNEMONIC:description severity - Single-digit code from 0 to 7 that is the severity of the message In this case it is 3 therefore error...

0 —emergency: System unusable. 1 —alert: Immediate action needed. 2 —critical: Critical condition—default level. 3 —error: Error condition. 4 —warning: Warning condition. 5 —notification: Normal but significant condition. 6 —informational: Informational message only.

Severity is 3 which is error

The previous question is for the same topic and was notification, now it's error??? Come on...

Yup its level 3 -error, I was looking at wrong output. Correct answer A.

I'm not sure about this one is it "D. notification", or the "C warning", since there is 401 ?

D. correct answer this is notification.