ExamTopics Logo
Mail Us[email protected]
Menu
Cisco Discussions
exam questions

Exam 350-601 All Questions

View all questions & answers for the 350-601 exam
Go to Exam

Exam 350-601 topic 1 question 492 discussion

Actual exam question from Cisco's 350-601
Question #: 492
Topic #: 1
[All 350-601 Questions]

An engineer implements an environment with multiple traffic types on a consolidated I/O link between Cisco Nexus 9000 Series Switch and MDS 9000 Series Switch. The configuration must meet these requirements:
• The unified I/O link must support LAN and SAN traffic.
• A single, multipurpose Ethernet transport must be used.
• The configuration must discard MAC addresses that are not part of the current fabric.
• The QoS markings must be preserved.

Which configuration set meets the requirements?

  • A. MDS-A(config)# interface fcip4 -

    MDS-A(config-if)# use-profile 8 -
    MDS-A(config-if)# peer-info ipaddr 200.200.100.7
  • B. N9K-2(config)# interface Eth2 -
    N9K-2(config-if)# switchport mode trunk
    N9K-2(config-if)# auto qos trust dscp
  • C. MDS-B(config)# interface fc3 -
    MDS-B(config-if)# switchport trunk mode on
    MDS-B(config-if)# switchport trunk allowed vsan 2-5
  • D. N9K-1(config)# fcoe fcmap 0e.fc.1d

    N9K-1(config)# int vfc 1 -
    N9K-1(config-if)# bind interface e1/3
Show Suggested Answer Hide Answer
Suggested Answer: A 🗳️
by Arch_Angel at Feb. 19, 2024, 1:10 p.m.

Comments

Chosen Answer:
This is a voting comment (?). It is better to Upvote an existing comment if you don't have anything to add.
Switch to a voting comment New
Submit Cancel
bizzar7774
1 week, 2 days ago
Selected Answer: D
You can prevent data corruption due to cross-fabric talk by configuring an FC-Map that identifies the Fibre Channel fabric for this Cisco Nexus device. When the FC-Map is configured, the switch discards the MAC addresses that are not part of the current fabric. ( https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/san_switching/configuration/guide/b-cisco-nexus-9000-nx-os-san-switching-configuration-guide-933/m-n9000-san-s-enabling-feature-fcoe.html )
upvoted 1 times
...
Gopz28
1 month ago
Selected Answer: B
An interface has to be trunk and qos marking is perserved with Auto qos hence answer is B
upvoted 1 times
...
asd248402
3 months, 3 weeks ago
Selected Answer: D
fcmap is neeed for segragation
upvoted 1 times
...
udo2020
3 months, 3 weeks ago
A must be wrong because it is for SPAN sessions. B and C are wrong so it should be D!
upvoted 1 times
...
crooks_1988
4 months, 2 weeks ago
I agree with D, also auto-qos command does not exist on MDS 9000 CLI reference guide
upvoted 1 times
...
Arch_Angel
5 months ago
Answer is D Configuring the FC-Map You can prevent data corruption due to cross-fabric talk by configuring an FC-Map that identifies the Fibre Channel fabric for this switch. When the FC-Map is configured, the switch discards the MAC addresses that are not part of the current fabric.
upvoted 3 times
samfab
2 weeks, 6 days ago
D https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/san_switching/configuration/guide/b-cisco-nexus-9000-nx-os-san-switching-configuration-guide-933/m-n9000-san-s-enabling-feature-fcoe.pdf
upvoted 1 times
...
...
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
exam
Someone Bought Contributor Access for:
SY0-701
London, 1 minute ago