For a locally switched FlexConnect AP, if the VLANs used by the AP for management and those used for client access are different, you need to consider:
C. The switch port mode must be set to trunk.
A trunk port allows multiple VLANs to pass through the same switch port. This setup enables the AP to tag client traffic with one VLAN while using a different VLAN for its management traffic. The switch port where the AP is connected must be configured to allow all necessary VLANs through, which is achieved by setting it to trunk mode.
C. The switch port mode must be set to trunk.
In a locally switched FlexConnect AP, the APs are connected to the switch port in trunk mode. This allows multiple VLANs to be used and traffic to be separated based on the VLAN tags.
upvoted 2 times
...
This section is not available anymore. Please use the main Exam Page.200-301 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
[Removed]
6 months, 3 weeks agolmmujsi
6 months, 4 weeks agopicho707
10 months, 3 weeks ago