Exam 300-415 topic 1 question 311 discussion

The correct answer is B, cause A, C and D, the eigrp router are all configured under VPN0 transport side, Only option B has VPN1 which is service side

Correct Answer is D. The option that is not appearing looks like: vpn 0 interface ge0/0 description "*** Internet Circuit ***" ip address 209.165.200.229/30 tunnel-interface encapsulation ipsec color public-internet allow-service all ! ! ! vpn 1 router eigrp address-family ipv4-unicast maximum-path paths 4 network 10.0.0.0/28 redistribute omp ! ! ! ! interface ge0/1 ip address 10.0.0.1/28 ! vpn 512 interface eth0 shutdown ! !

I think here are incomplete options to answer

In B, the tunnel-interface configurations are under VPN1 but any transport configs should be under VPN0. The question says we want to create a peering between the CSRv and the non-SDWAN devices on the Service VPN side (look at the diagram). Has to be C.

This must be missing a D option because all of it is wrong.

The network team must configure EIGRP peering at HQ with devices in the SERVICE VPN connected to WAN Edge CSRv. A and C peering in VPN 0, the only that peering with service VPN is the B (VPN1)

A is wrong because Router EIGRP command should not be under VPN0, but in global configuration B is wrong because public IP will not be configured under VPN1 C is correct - Transport configured and EIGRP configured and redistributing OMP into service-side

Voting for C, Others seem messed.

In cEdge configuration, first comes interface configs then router configs. I'll go with C.

I dont get iot , is it vpn in vpn case ? never heard of it.

Again,,, Guessing? This adds value how?

service VPN is 0? or it needs to be other that 0 like 1?

Missing data

A seems correct