397 packets with dribble condition detected under the interface statistics. A dribble condition typically indicates issues such as minor frame alignment errors, often linked to a bad Network Interface Card (NIC).
We don't have any errors , we don't have any large number of broadcast (broadcast storm) , we don't have collisions , the only thing that is not standard in this output is the MTU 1397 , but we are not losing any packets because of this so the only answer that remains it's C FIFO queueing .
C is correct
Queuing Strategy: fifo (first in first out)
there are no issues but as the question says, "which interface condition is occuring in the output?" so queuing is coerrect as an interface condition.
after revision i found that C dosen´t make sense, none of the options does to be honest, but A make a bit more sense to me since there´s no clear issue
Thanks to Copilot ( My question - ccna what indicates a bad NIC on interface outputs).
Its A
Input packets much higher than output packets, lots of dropped packets - BAD NIC
B. Incorrect. TX load and RX load are both at 1/255, ruling out high throughput. It's also not dropping any packets.
C. Incorrect. Queuing strategy is set to FIFO, and there is no throughput; it's not queuing anything.
D. Incorrect. There's only been 267 broadcast messages received and it's a very small percentage of received traffic.
So it has to be A. I'm not sure why though. Nothing stands out beside the non-default MTU size. Any idea folks?
Oh, for those who thing it's queuing because the input/output counters differ, this isn't the correct deduction. Those counters refer to the traffic inbound and outbound on a *single* interface, so it's just the number of packets send and received by the attached subnet.
You'd be correct if those numbers referred to the number of packets an interface was instructed to send, versus the number it actually did, but that's not what those numbers refer to.
By ChatGPT:
Based on the provided output, the condition of interface that is occurring is:
C. queueing
The output shows information related to the interface's queuing strategy, including the input queue size, output queue size, and input/output rates. It also mentions that the queuing strategy is "fifo," which stands for "First In, First Out." This means that packets are processed in the order they arrive, and the interface is not experiencing any drops in the output queue (Output queue: 0/300).
The other options are not supported by the information given in the output:
A. "bad NIC" (Network Interface Card) is not mentioned or implied in the output.
B. "high throughput" is not explicitly mentioned in the output. It only shows the bandwidth (BW) of the interface, but the current throughput is reported as 0 bits/sec for both input and output.
D. "broadcast storm" is not mentioned in the output. There is a line showing "Received 267 broadcasts (0 IP multicasts)," which indicates the number of broadcast packets received, but it doesn't suggest a broadcast storm.
This section is not available anymore. Please use the main Exam Page.200-301 Exam Questions
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
JJY888
Highly Voted 1 year, 11 months agostudying_1
1 year, 11 months agolferolm
Highly Voted 1 year, 5 months agogho5tface
1 year, 4 months agoMeysamDavabi
Most Recent 1 month, 1 week agomatass_md
8 months, 1 week ago[Removed]
1 year ago[Removed]
1 year ago[Removed]
1 year agoJulesAZ
1 year, 2 months agoZeroK
1 year agoJulesAZ
1 year, 2 months agogho5tface
1 year, 4 months ago[Removed]
1 year, 4 months ago[Removed]
1 year, 4 months agodropspablo
1 year, 9 months agodropspablo
1 year, 9 months agoPeter_panda
1 year, 11 months agostudying_1
1 year, 11 months agoLukai
6 months, 4 weeks ago