Right it is B
https://dl3.checkpoint.com/paid/f7/f70dd2f8bd9ae45ffa4d4cc7949417bd/CP_R80.20_ClusterXL_AdminGuide.pdf?HashKey=1575757569_5e1ec5aa8667f25c79188bbd5981478a&xtn=.pdf
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_ClusterXL_AdminGuide/Topics-CXLG/Active-Active-Mode.htm
Important:
- You can configure the Active-Active mode only on Management Server R80.40 (and higher) and only on ClusterXL R80.40 (and higher).
- The Active-Active mode does not provide Load SharingClosed of the traffic.
- Administrator must monitor the load on each Cluster Member (see Monitoring and Troubleshooting Clusters).
- Cluster Control Protocol (CCP) Encryption must be enabled, which is the default (see Configuring the Cluster Control Protocol (CCP) Settings).
- It is possible to configure the Cluster Control Protocol (CCP) to work on Layer 2.
- It is possible to enable Dynamic Routing on each Cluster Member , so they become routers in the applicable Area or Autonomous System on the site.
- In this case, you must enable the Bidirectional Forwarding Detection (BFD - ip-reachability-detection) on each interface that is configured for dynamic routing.
Load Sharing is Active/Active as others have said. Active/Standby is High Availability.
https://sc1.checkpoint.com/documents/R80.30/WebAdminGuides/EN/CP_R80.30_ClusterXL_AdminGuide/html_frameset.htm
for R80.10-R80.30 - There is Load Sharing solution set up
for R80.40 and higher - There is High Availability solution set up
Important:
You can configure the Active-Active mode only on Management Server R80.40
(and higher) and only on ClusterXL R80.40 (and higher).
The Active-Active mode does not provide Load Sharing of the traffic.
https://dl3.checkpoint.com/paid/f4/f4d6990356a601e316392367a146db5e/CP_R80.40_ClusterXL_AdminGuide.pdf?HashKey=1651239950_f1806be808da1c9d339d81fabcccc6c1&xtn=.pdf
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_ClusterXL_AdminGuide/Topics-CXLG/Active-Active-Mode.htm
in R80.10 only about loadsharing
https://dl3.checkpoint.com/paid/1a/1acadca72d98286f05d71f205568c347/CP_R80.10_ClusterXL_AdminGuide.pdf?HashKey=1651240349_0209b4bbc27c3d92b6b3bf7d3430456d&xtn=.pdf
one more thing: in smartconsole R80.40 (build 994000430) you can find HA, Load sharing and Active/Active mode, which is why this answer is not quite relevant and it is more correct to replace it with Active/Active
Answer B seems Correct : However one of the problems of LoadSharing set up is multicast packets that sometimes are not well handled by routers (IGMP as example). So you have to have a solution for these packets ! the keyword "only" invalidate the option A since there is loadsharing unicast ! So Answer B is more correct
The correct Answer should be B. Active/Active is for load sharing Deployment
upvoted 5 times
...
Log in to ExamTopics
Sign in:
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.
Upvoting a comment with a selected answer will also increase the vote count towards that answer by one.
So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.
edralev
Highly Voted 5 years agoribidibidi
4 years, 11 months agohanson
Highly Voted 4 years, 11 months agodavid_vera
Most Recent 4 months, 2 weeks agoruben_mv
2 years, 4 months agoMavareno
2 years, 6 months agobabochnik
2 years, 6 months agobabochnik
2 years, 5 months agoRonak_CCSA
2 years, 9 months agoLLAMBRA
2 years, 12 months agodys
3 years agodys
3 years agodys
3 years agoKenetic
3 years, 2 months agoAychi
3 years, 12 months agobabajana
3 years, 12 months agoC4rlos
4 years, 7 months agojham
4 years, 8 months ago